Maintenance
After receiving
Important Maintenance Notice #1
Make sure to fully charge your Boost fin right after you receive it, and fully charge the battery at least once a month even if you don't use the fin.
Before riding
The charger jack must be sealed when riding with Boost Fin. Cap it with either a stock jack plug or use a wax earplug.
Important Maintenance Notice #2
Always seal the charger jack before riding.
After riding
Rinse your Boost Fin with fresh water after a surf session.
Important Maintenance Notice #3
Never charge your fin if the jack is wet. Make sure that the jack is fully dried before charging.
Сorrosion cleaning
If you can see some corrosion on the jack, it must be cleaned off as soon as possible. Clean with a toothbrush and an electrical contact cleaner like the CRC QD Electronic Cleaner. You can also use other plastic-safe electrical contact cleaner of your choice.
After cleaning, to extend Boost Fin life, treat the contact with a waterproof lubricant for electrical contacts. For example, CRC Dielectric Grease or any similar waterproof & plastic safe grease of your choice.
Remote maintenance
To ensure a steady signal, change the battery in the remote control frequently.