Longboard Adapter

When you purchase the Longboard Adapter, you will receive:

• Longboard Adapter
• Plate & screw for the installation
• Dowel pin

The Longboard Adapter comes pre-attached to the fin, so the adapter is included in your package. To begin the installation process, you'll need to unscrew the adapter using the screwdriver provided.

Installation Instructions

1. Select the Hole: Decide whether to use the top or bottom hole for the metal pin. We recommend trying both options to determine which provides the best fit for your setup. Note that the bottom hole is specifically designed for deep fin boxes.
2. Insert the Adapter: Carefully push the adapter into the fin box until it is securely seated.
3. Secure the Adapter: Use the provided screw to fasten the adapter firmly in place within the fin box.
4. Final Installation: Once the adapter is successfully installed, proceed to attach your fin.
5. Removing the Adapter: Unscrew the adapter first. If the adapter feels tight and you need to remove it, gently use a tool such as a screwdriver to pry it out without damaging your board.

For a visual guide on the installation process, please refer to the video below:

Tip: If you encounter any issues with fitting, try adjusting the dowel pin as demonstrated in the video. The adapter features two holes to accommodate different types of fin slots, ensuring versatility for your longboarding needs.