Flip Lock Adapter

Installation Instructions

1. Align the Adapter: Begin by taking the adapter and aligning the circular part with the back notch of the fin box on your board. This alignment is crucial for a proper fit.
2. Insert the Fin: Carefully press down on the adapter until it is fully seated and flush with the fin box. Make sure it is positioned correctly to prevent any movement during use.
3. Secure the Fin: Push the fin towards the back of the fin box as far as it will go. This step is important for stability.
4. Lock in Place: Lift the Flip Lock lever and press down firmly to secure the fin in place. You should hear a click, indicating that it is locked.
5. Check Stability: Finally, give the adapter a gentle shake to ensure it is stable and does not move within the box. A properly installed adapter will enhance your board's performance and provide a smoother ride.
6. Install the Fin: Finally, take the provided screws and securely attach the fin to the adapter. Make sure they are tightened adequately, but be careful not to overtighten, as this could damage the fin or adapter.

Tip: Using a safety leash is strongly recommended to ensure optimal performance and longevity for this type of connection. For a step-by-step tutorial on how to attach the leash to your fin and board, click here.